| Version | Logs |
| Smart Cloud v.16.31 | |
| Smart Cloud v.16.27 | 1.Modify can not upload pic bug in AC page for DDPs |
| Smart Cloud v.16.25 | 1.Modify ESR24 and ESR28 motor function 2.Added more Dry Contact for ESR24 and ESR28 3.Modify can not save remark for ESR24 and ESR28 |
| Smart Cloud v.16.24 | Modify DDPs module bugs: 1. Security page can not save remark bug 2. UI display some unknown symbol 3. Cancel some invalid page for AC Graphic |
| Smart Cloud v.16.20 | 1.Modify fan module 2.DDP module add function type --> Fan speed control. 3.RSIP --> RS232 to S-Bus --> RS232... --> add Header symbol(<Ctrl+T>) 4. Add SMS module 5. Fixed bugs: 5.1. DDPS module - supplement - Logic - Logic remark not display 5.2. DDPS module - DDP - Page - Page displays when save cause "command error" 5.3. Smart Cloud main interface sometimes display error of combination subnet id and device id when exists device DDPS 5.4. Clear device remark when Smart Cloud can find but can not display exactly. This function place at "Address - Manage device addressing - Clear remark" |
| Smart Cloud v.16.19 | - Modify fan module - DDP module add function type --> Fan speed control. - RSIP --> RS232 to S-Bus --> RS232... --> add Header symbol(<Ctrl+T>) - Add SMS module Fixed bugs: - DDPS module - supplement - Logic - Logic remark not display - DDPS module - DDP - Page - Page displays when save cause "command error" - Smart Cloud main interface sometimes display error of combination subnet id and device id when exists device DDPS - Clear device remark when Smart Cloud can find but can not display exactly. This function place at "Address - Manage device addressing - Clear remark" |
| Smart Cloud v.16.16 | - DDPS module added |
| Smart Cloud v.16.15 | - Security module old page 'bypass' change into 'bypass watch dog'.Watch dog configuration function added. - Security module page 'Vacation Settings' fixed bugs which 'Enable' unchecked not work. - Security module page 'General - History Log' add history type 'Watch Dog'. - 5-IPIR module added. - Microwave add Multi-Target-Config page. |
| Smart Cloud v.16.07 | - Modify some bugs in security module - Add 5IN1T/5IN1S/6IN1T/6IN1S/8IN1 module - Modify some bugs in 9IN1 module |
| Smart Cloud v.16.06 | - Add 5in1 Configuration; - Solve the Dimmer Bug which can't open data base; - Solve the Bug which can't read the security remark - Fix the display not Clean problem |
| Smart Cloud v.16.05 | - Add new function for 9in1:Temperature condition,Temperature compensate,Translational speed for PIR and so on. - Modify a bug in the Security module's "Bypass" page. - Modify some bugs which can not read the PIR's status and can not read the count down correct. - Modify IR Macro bug |
| Smart Cloud v.16.01 | - Update the icons of the main menu - It can scan the devices of hotel,but can not configure - Repair the bugs of the last version - User can entry the device configure page from the main menu |
| Smart Cloud v.16.00 | - Modify some bugs of the "Subnet Filtered List" form. - Add a configure interface for the LED Driver device. - Add a configure interface for the Fan Speed device. - Cancel the license. |
| Smart Cloud v.15.50 | - Modified MultiSensor series equipments' illumination compensation range from 1-100 to 1-200. - Added the new function of 6in1TS, 5in1TS 6in1TL, 5in1TL. - Added the new function of S-Wave control. - Added the new interface of LED driver control. In clude the circuit, scene, sequence and light control. Debug: - Corrected the MultiSensor can not read the temperature sensing besides the first channel of 4T. - Corrected the reception set range of infrared (1-20). - Corrected the display of MultiSensor pages to switch. |
| Smart Cloud v.15.40 | - Added the Serial License Registration. |
| Smart Cloud v.15.33 | - Updated security, IR receiver page for 319,320 devices, Solved the Remark can not be saved. - Solved logic commands for 319,320 devices can not be saved - Function increases or adjustments: * Updated the illumination compensation refresh. * Updated temperature touched C, F adjust automatically refresh * Temperature compensation value from -16 to +16 * Increased 0x0031 command for 319 testing functionality page * Increased SmartCloud RadioGroup control display settings support * The original 5020 equipment from SmartHotel special equipment re-developed into a regular Zone Beast equipment. * Updated 319 (8in1) and 320 (New 9in1) temperature of the device protocol, and the increase in the settings page of the temperature sensor. |
| Smart Cloud v.15.28 | - Modify the dimmer module. In area tab, it does not have partition operation error. |
| Smart Cloud v.15.25 | - The impulse device is added - New function 9in1 pairing with DDP fixed - Dimmer and relay problem fixed |
| Smart Cloud v.15.00 | |
| Smart Cloud v.14.26 | |
| Smart Cloud v.14.24 | |
| Smart Cloud v.14.22 |
| Version | Logs |
| Trail Click v.1.0.11 | - Modify a bug in Trail Click which page "Scene" and "Dry Contact" can not display the list very well. - integrated together. - Change the mode of scan the device list |
| Version | Logs |
| Swave v.1.2 | |
| Swave v.1.3 |
| Version | Logs |
| 1D1R V1.06 1D2R V1.06 2D1R V1.06 2R V1.06 3R V1.06 |
- Off line time is 30s now. |
| 3R V1.04 | - Fixed the curtain motor control bug by using the dry contact; - Fixed the machanical switch delay bug by using the dry contact; |
| 1D1R V1.03 1D2R V1.03 2D1R V1.03 |
- The order number of dry connector and actual silk-screen is inconsistent,now has solved. - The 2R output port order number and actual silk-screen is inconsistent,now has solved. |
| 2R V1.03 3R V1.03 |
- The order number of dry connector and actual silk-screen is inconsistent,now has solved. |
| 1D1R V1.02 1D2R V1.02 2D1R V1.02 |
- It support for single channel control instructions and scene control instruction - It integrates the function of 4Z - It integrates the function of fan speed control above all dimmer channel - The configuration information can backup and recovery - This is the first release to customers |
| 2R V1.02 3R V1.02 |
- It support for single channel control instructions and scene control instruction - It integrates the function of 4Z - The channel one and channel two support motor control - The configuration information can backup and recovery - This is the first release to customers |
| Version | Logs |
| Touch Switch v.1.0.10 | - Modify a bug in Trail Click which page "Scene" and "Dry Contact" can not display the list very well. - integrated together. - Change the mode of scan the device list |
| Version | Logs |
| JTAG Firmware Upgrade |
| Version | Logs |
| 0-10V Ballast Oct 9 2010 |
| Version | Logs |
| 4Z Dry Input v.2.13 | - When the button mode is set to open only, it directly output instructions to the target, without modifying the intensity value, like the DDP. |
| 4Z Dry Input June 20 2012 |
| Version | Logs |
| 1in1 Simple PIR v.0.04 (with PIR commands) | - Add movement status return. |
| 1in1 Simple PIR v.0.03 | - Add a single trigger and trigger many times for PIR delaying - Add music command |
| 1in1 Simple PIR v.0.02 | - Solve unable to transmit multi-byte command |
| Version | Logs |
| 5in1 v.1.62 (L) | - Logic control of temperature is more good. - Turn off the extra commands sent to the bus. - Modify the bug of broadcast ID. |
| 5in1 v.1.62 (S) | - Logic control of temperature is more good. - Turn off the extra commands sent to the bus. - Modify the bug of broadcast ID. |
| 5in1 v.1.61 (L) | - Add the Temperature Broadcast function - Modified the some sensor values will be distorted - With the latest smart cloud |
| 5in1 v.1.61 (S) | - Add the Temperature Broadcast function - Modified the some sensor values will be distorted - With the latest smart cloud |
| 5in1 v.1.58 (L) | - Modified the instability of IR Launch. - Modified that the long code of IR launch can not be sent. - Optimize the logic part. - Optimize the operation speed of 9in1. - Increase the motion speed of the motion sensor.(SC V16.05) |
| 5in1 v.1.58 (S) | - Modified the instability of IR Launch. - Modified that the long code of IR launch can not be sent. - Optimize the logic part. - Optimize the operation speed of 9in1. - Increase the motion speed of the motion sensor.(SC V16.05) |
| 5in1 v.1.56 (L) | - Updated Mac reconfiguration after upgraded. |
| 5in1 v.1.56 (S) | - Updated Mac reconfiguration after upgraded. |
| 5in1 v.1.53 (L) | |
| 5in1 v.1.53 (S) | |
| 5in1 v.1.45 (L) | |
| 5in1 v.1.45 (S) |
| Version | Logs |
| 6in1 v.1.62 (L) | - Logic control of temperature is more good. - Turn off the extra commands sent to the bus. - Modify the bug of broadcast ID. |
| 6in1 v.1.62 (S) | - Logic control of temperature is more good. - Turn off the extra commands sent to the bus. - Modify the bug of broadcast ID. |
| 6in1 v.1.61 (L) | - Add the Temperature Broadcast function - Modified the some sensor values will be distorted - With the latest smart cloud |
| 6in1 v.1.61 (S) | - Add the Temperature Broadcast function - Modified the some sensor values will be distorted - With the latest smart cloud |
| 6in1 v.1.56 (L) | - Updated Mac reconfiguration after upgraded. |
| 6in1 v.1.56 (S) | - Updated Mac reconfiguration after upgraded. |
| 6in1 v.1.53 (L) | |
| 6in1 v.1.53 (S) | |
| 6in1 v.1.45 (L) | |
| 6in1 v.1.45 (S) |
| Version | Logs |
| 8in1 v.1.62 | - Logic control of temperature is more good. - Turn off the extra commands sent to the bus. - Modify the bug of broadcast ID. |
| 8in1 v.1.61 | - Add the Temperature Broadcast function - Modified the some sensor values will be distorted - With the latest smart cloud |
| 8in1 v.1.58 | - Modified the instability of IR Launch. - Modified that the long code of IR lanunch can not be sent. - Optimize the logic part. - Optimize the operation speed of 9in1. - Increase the motion speed of the motion senser.(SC V16.05) |
| Version | Logs |
| 9in1 v.1.62 | - Logic control of temperature is more good. - Turn off the extra commands sent to the bus. - Modify the bug of broadcast ID. |
| 9in1 v.1.61 | - Add the Temperature Broadcast function - Modified the some sensor values will be distorted - With the latest smart cloud |
| 9in1 v.1.59 | - Modified the instability of IR Launch.(When the bus is busy) |
| 9in1 v.1.58 | - Modified the instability of IR Launch. - Modified that the long code of IR lanunch can not be sent. - Optimize the logic part. - Optimize the operation speed of 9in1. - Increase the motion speed of the motion senser.(Smart Cloud V16.05) |
| 9in1 v.1.56 | - Updated Mac reconfiguration after upgraded. |
| 9in1 v.1.54 | - 9in1 pairing to DDP has been added. - add all key button function to remote controller. - Temperature logic. - LUX updating and temperature range modification （revised +_8 degree to +_16 degree. |
| 9in1 v.1.52 | - Modified the problem that it cannot save the value of compensating for temperature. |
| 9in1 v.1.45 |
| Version | Logs |
| CDP v.0.1 |
| Version | Logs |
| Control4 3B | |
| Control4 4B | |
| Control4 6B |
| Version | Logs |
| DALI v.0.1 |
| Version | Logs |
| DDP v.1.67 | |
| DDP v.1.66 | With Upgrading Manual |
| DDP v.1.64 | - Fixed problem of the IR eye easy to interfere. |
| DDP v.1.60 | - The number of air-conditioning up to 5 that can be controled by ir. - Each button can be setting as fan speed controll mode. |
| DDP Library Jan 5 2012 | |
| DDP v.1.54 | - Listen configuration actions of the HVAC that binding with DDP - Add command to call DDP light page bottom functions |
| Version | Logs |
| DDPs v.1.67 | |
| DDP Icons v.1.1 | |
| DDP Icons | |
| DDPs-9in1s v.1.41 | - Optimize the command returns. |
| DDPs-9in1s v.1.2 | - Always send temperature command |
| DDPs v.1.60 |
- Add ability that to control multi-AC by IR |
| DDPs Supplement v.1.1 | - Remove the temperature sensor.
- Add 4 LED. - Add voice control of logic. - In addition to the above 3 points the rest same 9IN1 |
| Version | Logs |
| DTP v.1.66 | With Upgrading Manual |
| DTP v.1.64 | - Fixed problem of the touch button hanging sometimes. - Fixed problem of the IR eye easy to interfere. |
| Version | Logs |
| Dimmer 2CH v.2.03 | |
| Dimmer 2CH v.2.01 |
| Version | Logs |
| Dimmer 4CH v.2.03 | |
| Dimmer 4CH v.2.01 |
| Version | Logs |
| Dimmer 6CH v.2.03 | |
| Dimmer 6CH v.2.01 |
| Version | Logs |
| Dimmer 8CH v.2.03 |
| Version | Logs |
| DMX 48 v.0.1 |
| Version | Logs |
| DMX 512 v.0.1 |
| Version | Logs |
| Fan Controller v.0.98 |
| Version | Logs |
| HVAC v.1.31 | - Fixed the Fan Speed Changing Delay issue; - Fixed the Mode Changing Delay issue; |
| HVAC v.1.29 | |
| HVAC v.1.28 |
| Version | Logs |
| Hotel AUX v.1.21 | |
| Hotel AUX v.1.20 | - Modify audio command |
| Hotel AUX v.1.14 | - add the address detect and address save. |
| Hotel AUX v.1.13 | - Fix the cut power delay bug |
| Hotel AUX v.1.11 |
| Version | Logs |
| Hotel Bedside v.1.09 | - Add a commmand to read panel stype 1 hotel, 2 meeting, 3 house |
| Hotel Bedside v.1.08 | - Enable it receive universal switch commad for it can be control hotel service by other device(DDP++) - Rectify bug that climate cannot synch display wiht DDP,when use ddp to control same hvac. |
| Hotel Bedside v.1.00 |
| Version | Logs |
| Hotel Card v.1.19 | |
| Hotel Card v.1.16 | - add led flash when long press the DND,CLEAN and LAUNDRY button |
| Hotel Card v.1.13 |
| Version | Logs |
| Hotel Door Bell(With Card) V1.05 | - Optional by external relay module to control door lock - Optional to control the doorbell by an external switch module - The doorbell increases the flash light reminding function |
| Hotel Door Bell(With Card) V1.01 | - Rectify the BUG of display of the hotel service |
| Version | Logs |
| Hotel Door Bell(Without Card) V1.05 | - Optional by external relay module to control door lock - Optional to control the doorbell by an external switch module - The doorbell increases the flash light reminding function |
| Hotel Door Bell(Without Card) V1.01 | - Rectify the BUG of display of the hotel service |
| Version | Logs |
| Zone Beast v.1.31 | |
| Zone Beast v.1.25 | - Fixed a problem with its temperature measurement error |
| Zone Beast v.1.18 | - Solve issue (HVAC can't get temperature form specify 4T channel.) - Remove the bug that if hvac in fan mode and fan speed in auto maybe it incorrect working. |
| Zone Beast v.1.17 | - Remove the bug that second byte error return from channel reversing operation instructions |
| Zone Beast v.1.16 | - Remove the bug that occasionally the address to be loss |
| Version | Logs |
| Impluse Counter v.1.02 |
| Version | Logs |
| IR Learner v.1.00 |
| Version | Logs |
| IR v.1.06 |
| Version | Logs |
| IR Macro v.1.06 | - Add functions for Macro control |
| Version | Logs |
| LED Driver V.0.08 | - Change the response of RGBW value modification. |
| LED Driver V.0.06 | - When finish the sequence running, the led-driver need to return to the previously running mode. - When finish the scene and the RGBW running, the led-driver no need to return to the previously running mode. - Add the command for reading the current value of all the channels. |
| LED Driver V.0.05 |
| Version | Logs |
| Logic v.1.23 | - Modify the problem in music control command three times to resend. |
| Logic v.1.22 | - The program is compatible with the new clock chip for SD2401. |
| Logic v.1.21 |
| Version | Logs |
| Microwave Sensor v.1.01 | |
| Microwave Sensor v.0.94 | - Modify the code so that the user can select: when the sensor senses some activity, whether its internal beeper beeps(The default is the buzzer is off, but when the sensor is forced open, the buzzer will sound) |
| Microwave Sensor v.0.93 |
| Version | Logs |
| Mini IO v.0.02 | - Modified the problem that it same time the handle competition of 3 port. |
| Mini IO v.0.01 |
| Version | Logs |
| Mix24 v.1.22 | - Fixed the error of temperature measurement on the radiator |
| Mix24 v.1.21 | - Optimizing the respons speed of the relay - Remove bug for channel reversing. |
| Version | Logs |
| RS232IP v.2.00 | - Update for remote control |
| RS232IP v.1.34 | - Solve unable to transmit multi-byte command |
| RS232IP v.0.03 | |
| RS232 Bridge to HAI | |
| Cool Master v.0.01 | |
| Daikin v.0.01 | |
| Honeywell v.0.01 |
| Version | Logs |
| Relay 2CH 5A v.0.01 | - Add command of 0x0033. - Modified the Can't manually OFF in curtain mode. |
| Relay 2CH 5A Nov 20 2012 |
| Version | Logs |
| Relay 3CH v.1.05 |
| Version | Logs |
| Relay 4CH 16A v.2.21 | - Fixed the crash problem of the relay, when modify its flag of the manually pairing. |
| Relay 4CH 16A v.2.20 |
| Version | Logs |
| Relay 4CH 20A v.2.21 | - Fixed the crash problem of the relay, when modify its flag of the manually pairing. |
| Relay 4CH 20A v.2.20 |
| Version | Logs |
| Relay 6CH 16A v.2.21 | - Fixed the crash problem of the relay, when modify its flag of the manually pairing. |
| Relay 6CH 16A v.2.20 |
| Version | Logs |
| Relay 8CH 16A v.2.21 | - Fixed the crash problem of the relay, when modify its flag of the manually pairing. |
| Relay 8CH 16A v.2.20 |
| Version | Logs |
| Relay 12CH v.1.07 | - Fixed the crash problem of the relay, when modify its flag of the manually pairing. |
| Relay 12CH v.1.06 |
| Version | Logs |
| Security v.1.3 | - The program is compatible with the new clock chip for SD2401. |
| Security v.1.2 | - Add BUS Watch Dog in Security Module. - Modified the conflict of alarm commands storage and the memory of vacation. - Log for watchdog. |
| Security v.1.1 |
| Version | Logs |
| Zone Audio v.1.23 | - Modify the IP,before the IP read the list of songs sometimes appear Insanity. |
| Zone Audio v.1.22 | - Add the infrared remote control function |